Metropol Container

21m²

MODEL 01

21 m² Metropol Container Model

This configuration is designed around an open premium office with a compact service niche. The layout and technical components can be tailored to the approved project requirements.

External size3.00 x 7.00 m

Planan open premium office with a compact service niche

HeightExternal 2.60 m; approximate clear internal height 2.40 m

Request this model →

EXAMPLE CONFIGURATION

Technical specification

Technical values are example configurations. The final scope is confirmed against the approved design and verified site data.

Model / area	21 m² Metropol Container model
Approximate external dimensions	3.00 x 7.00 m
Plan concept	an open premium office with a compact service niche
Container / cabin height	External 2.60 m; approximate clear internal height 2.40 m
Structural system	Welded or bolted galvanised steel frame, sized for the verified structural design loads
External wall	80 mm high-density insulated panel with selected metal or timber-look façade finishes
Internal wall	50 mm insulated panel or double-sided plasterboard partition with mineral-wool infill
Roof	Galvanised trapezoidal sheet, condensation-control layer, 80 mm rock-wool insulation and concealed or exposed rainwater drainage
Floor	Cement board over a galvanised floor structure with commercial PVC, laminate or ceramic finish to suit the use
External door	Insulated steel or thermally broken glazed aluminium external door, approximately 90 × 210 cm
Window	Thermally broken aluminium/PVC frames with Low-E double glazing
Electrical	Flame-retardant cable containment, residual-current protection, earthing, LED lighting and sufficient socket circuits
Plumbing	PPRC clean-water and PVC waste lines where wet areas are required, with accessible maintenance points
Climate control	Split air-conditioning provision sized by load calculation, with natural or mechanical ventilation options
Fire and safety	Smoke detection, emergency lighting and fire-extinguisher provision to suit the occupancy class and local regulations

42m²

MODEL 02

42 m² Metropol Container Model

This configuration is designed around a glazed reception, private office, meeting room, kitchen and WC. The layout and technical components can be tailored to the approved project requirements.

External size6.00 x 7.00 m

Plana glazed reception, private office, meeting room, kitchen and WC

HeightExternal 2.60 m; approximate clear internal height 2.40 m

Request this model →

EXAMPLE CONFIGURATION

Technical specification

Technical values are example configurations. The final scope is confirmed against the approved design and verified site data.

Model / area	42 m² Metropol Container model
Approximate external dimensions	6.00 x 7.00 m
Plan concept	a glazed reception, private office, meeting room, kitchen and WC
Container / cabin height	External 2.60 m; approximate clear internal height 2.40 m
Structural system	Welded or bolted galvanised steel frame, sized for the verified structural design loads
External wall	80 mm high-density insulated panel with selected metal or timber-look façade finishes
Internal wall	50 mm insulated panel or double-sided plasterboard partition with mineral-wool infill
Roof	Galvanised trapezoidal sheet, condensation-control layer, 80 mm rock-wool insulation and concealed or exposed rainwater drainage
Floor	Cement board over a galvanised floor structure with commercial PVC, laminate or ceramic finish to suit the use
External door	Insulated steel or thermally broken glazed aluminium external door, approximately 90 × 210 cm
Window	Thermally broken aluminium/PVC frames with Low-E double glazing
Electrical	Flame-retardant cable containment, residual-current protection, earthing, LED lighting and sufficient socket circuits
Plumbing	PPRC clean-water and PVC waste lines where wet areas are required, with accessible maintenance points
Climate control	Split air-conditioning provision sized by load calculation, with natural or mechanical ventilation options
Fire and safety	Smoke detection, emergency lighting and fire-extinguisher provision to suit the occupancy class and local regulations

84m²

MODEL 03

84 m² Metropol Container Model

This configuration is designed around a large reception, open office, private rooms, meeting and social spaces. The layout and technical components can be tailored to the approved project requirements.

External size7.00 x 12.00 m

Plana large reception, open office, private rooms, meeting and social spaces

HeightExternal 2.60 m; approximate clear internal height 2.40 m

Request this model →

EXAMPLE CONFIGURATION

Technical specification

Technical values are example configurations. The final scope is confirmed against the approved design and verified site data.

Model / area	84 m² Metropol Container model
Approximate external dimensions	7.00 x 12.00 m
Plan concept	a large reception, open office, private rooms, meeting and social spaces
Container / cabin height	External 2.60 m; approximate clear internal height 2.40 m
Structural system	Welded or bolted galvanised steel frame, sized for the verified structural design loads
External wall	80 mm high-density insulated panel with selected metal or timber-look façade finishes
Internal wall	50 mm insulated panel or double-sided plasterboard partition with mineral-wool infill
Roof	Galvanised trapezoidal sheet, condensation-control layer, 80 mm rock-wool insulation and concealed or exposed rainwater drainage
Floor	Cement board over a galvanised floor structure with commercial PVC, laminate or ceramic finish to suit the use
External door	Insulated steel or thermally broken glazed aluminium external door, approximately 90 × 210 cm
Window	Thermally broken aluminium/PVC frames with Low-E double glazing
Electrical	Flame-retardant cable containment, residual-current protection, earthing, LED lighting and sufficient socket circuits
Plumbing	PPRC clean-water and PVC waste lines where wet areas are required, with accessible maintenance points
Climate control	Split air-conditioning provision sized by load calculation, with natural or mechanical ventilation options
Fire and safety	Smoke detection, emergency lighting and fire-extinguisher provision to suit the occupancy class and local regulations

Metropol Container

Designed as a product family, not a single plan.

One product. Three engineered scales.

21 m² Metropol Container Model

Technical specification

42 m² Metropol Container Model

Technical specification

84 m² Metropol Container Model

Technical specification

The final model begins with verified site data.

Choose the function. Let’s design the container together.