
7 m² WC & Shower Container Model
This configuration is designed around one shower, one WC and a washbasin. The layout and technical components can be tailored to the approved project requirements.
Technical specification
Technical values are example configurations. The final scope is confirmed against the approved design and verified site data.
| Model / area | 7 m² WC & Shower Container model |
|---|---|
| Approximate external dimensions | 2.50 x 2.80 m |
| Plan concept | one shower, one WC and a washbasin |
| Container / cabin height | External 2.60 m; approximate clear internal height 2.40 m |
| Structural system | Welded or bolted galvanised steel frame, sized for the verified structural design loads |
| External wall | 50 mm rock-wool-filled sandwich panel with pre-painted galvanised steel faces |
| Internal wall | Water-resistant panel partitions with compact laminate or ceramic finishes in wet zones |
| Roof | Galvanised trapezoidal sheet, condensation-control layer, 80 mm rock-wool insulation and concealed or exposed rainwater drainage |
| Floor | Water-resistant cement board with slip-resistant homogeneous vinyl or ceramic finish, laid to falls toward floor drains |
| External door | Insulated steel external door, approximately 90 × 210 cm |
| Window | PVC frames with double glazing and optional insect screen |
| Electrical | Flame-retardant cable containment, residual-current protection, earthing, LED lighting and sufficient socket circuits |
| Plumbing | PPRC clean-water and PVC waste lines, hot-water connection, floor drains and accessible service valves |
| Climate control | Split air-conditioning provision sized by load calculation, with natural or mechanical ventilation options |
| Fire and safety | Smoke detection, emergency lighting and fire-extinguisher provision to suit the occupancy class and local regulations |


